|
|
Other links owned by this user |
|
|
Other links at Industry & Mining |
| 1. |
refrigerated compressed air dryer
|
|
|
Design characteristics
Perfect refrigerated system configuration. Initial parts come from foreign famous brands to ensure efficient & system reliable running & life as well.
Refrigerated & air system is accurate calculated by professional designing engineer, keep 20% capacity.
Gas liquid separated thoroughly. Filtering separated with HANKISON element. Thorough separation, avoid the second vapor of water, ensuring dry effect. It better than cyclone separated and it will reach efficiency at 99.99%.
Pipeline is made from inner zincification. You can choose working pressure during 0.3~4.5Mpa.
Stainless steel pipeline, it's suitable for medicine, food stuff, acid-resistant, alkaline-resistant and erodent-resistant industry.
Ripple pipeline of both internal and external of the heat exchanger to increase the using rate of cooling air, adverse current structure, perfect returning temperature and it won't freeze.
Evaporator is made from laminose copper pipeline with aluminum flake, high efficiency of heat exchanging of the perfect structure.
Good drainage, it adopts 3 grades for draining, can drain lots of condensate water and oil contaminant so as to keep clean and dryness of the system and air, meanwhile reduce system load.
Multi-control of circuitry to supply to different users (single control; integrate circuit, linkage control, PC panel, frequency conversion, etc.)
Outer cooling fan with large volume, low noise, and long life if switch frequently.
Low condenser made from copper, slow flow, multi-cycling and high heat exchanging rate. It won't freezing and dirty if stop for a long time.
Armstrong foam burning resistant & adiabatic material. It's the least loss of cooling air.
Protection level of compressor is IP54 (dustproof and spill proof).
|
| 2. |
MFRR. OF TEXTILE SPINNING MACHINERY SPARES
|
|
|
Respected Sir,
Our company is into manufacturing and supplying (since 1967) of all types of spares of Spinning, Weaving & Winding M/c against part no as per following details.
For Spinning Dept: ZINSER 321E - 351 R/F and S/F (660), Toyoda RX 240 Ring Frame, Mechanical parts, under casing, Lattice, Filters & including all types of (Any material) Gears, Brackets & Drafting & other Parts.
For Weaving M/c.: Ruti C, Sulzer, Tsudakoma, Picanol-PAT GAMA, OMNI Airjet Wvg. Machines and any other.
For Winding M/c.: Autoconer 138 238, Autocoro SE 7, 8, & 9, RJK Winding & Murata 7 II & 7 IV, and any other.
Over the years we have developed spares for the above Machineries. We can develop spares as per the client’s specifications & requirements. Also we can develop any type parts of Plastic, Nylon, Rubber & Hylam materials.
Recently we have started exports of the above mentioned machinery spares and can provide Quality products as per International Standards.
In addition, if you require any more information, we would be pleased to furnish the details for the same.
Also we humbly request you to register our name in your approved suppliers List and send us your Valued Enquiries & Orders.
Awaiting a positive reply.
Thanking you & best regards
For R. P. Sales Corporation
Anand Mehta (M: +91-9974090693)
|
| 3. |
Film faced Plywood Supplier
|
|
|
Tianjin Canex Industry Co., Ltd
Add: Chongqing Street 60, Jinnan district of Tianjin 300000, China
Phone: 86 22 8816 0304
Fax: 86 22 8816 1305
Email: info at canex-group dot com, wood_china at 126 dot com
www dot canex-group dot com
We specialized in manufacturing Film Faced Plywood, Birch Plywood, UV Coated Plywood, Okoume Plywood, Block Board and MDF. If you want to know more, please enter our website www dot canex-group dot com.
If you are interested in our products, please feel free to let us know and we will send you our competitive price and share our best service.
Welcome your visiting our mills. Sincerely we avail ourselves of this opportunity to cooperate and establish long-term and friendly business relationship.
We are looking forward to your kindly inquiries.
|
| 4. |
sell Hydrocarbon Petroleum Resin for Hot Melt Adhesive
|
|
|
Product Introduction:
Hydrocarbon petroleum resins have become the industry standards in the adhesive and sealant industry worldwide.HR-A5090,HR-A5100,HR-A5101,HR-A5110 and HR-A5120 are suitable for Adhesives.They have excellent compatibility with EVA,APAO, styrene block polymers(such as SIS,SBS,SEBS),Natural Rubber and many kinds of synthetic rubbers,as well as natural tackifier resins(such as terpene,colophonyl and its derivatives).They provide enhanced performance in Hot Melt Adhesive applications:
HR-A5090,HR-A5100,HR-A5101,HR-A5110 and HR-A5120 are suitable for Hot Melt Adhesives,including quick packaging adhesives,bookbinding adhesives,wood adhesive,adhesive tape and glue sticks.They also can be used singly as tackifier resin in Hot Melt Adhesive,and can also be used in blends with different resins to improve adhesive performance.
Package
Packed in 25kgs paper bag, pp bag or paper and pp compounding bags;15.5MT without pallets or 13.75MT with pallets for 1*20 FCL.Also can use 700kgs container sack,14MT with pallets for 1*20 FCL.
Storage & Defence
They are non-hazardous product,It should be stored in dry and cool place with fire fighting facilities.Far away from fire.sunshine,moisture and pollution.
|
| 5. |
Daily Stuffs
|
|
|
Daily stuffs solve your annoying problems. Please find new advice articles posted regularly.
|
|
|
